Caravan Step Risers are a 3D printed foot for a step on a caravan or motorhome. Its primary function is to prevent the step from sinking into soft ground when you park on the grass, simply by increasing the step's load area. The second function is to enable the step to be raised a variable amount by stacking one or more of the additional riser plates. The top plate raises the height of the step by approximately 6mm, and the other two models are for riser plates that raise a further 10mm and 20mm. In each of the boards there are holes for the stakes, which allow a standard tent peg to be pushed through the assembled stack for extra stability.