This reverse mount adapter is designed for Sony E-mount cameras and lenses with a 49mm filter thread. It makes it possible to take close-up photos without having to use a macro lens. A manual aperture lens is recommended.
The adapter holds the lens securely in place and although there is a printed thread on the model, it may take a few tries to fit properly the first time due to 3D printing irregularities.
This model has been tested on and developed for the Meike/Neewer 35mm f1.7 on a Sony A6400. The magnification is around 1:1.5 and the depth of field is very shallow. You can increase the depth of field by using a higher f-value. The adapter can also cause distortion vignette, so an extension tube is recommended.
There are now also models with a wire diameter of 52mm and 55mm, respectively, as well as a 40.5mm model, which has been tested with the 16-50 PZ kit. In order to control the aperture, it must be set electronically and the lens must be removed before the camera is turned off.
The product is designed by
trabladorr