Tap & Drill Alignment Tool is a tool to help align 20x20 extrusion for drilling and tapping. This tool is ideal for mounting printer frame made with 20x20mm extrusion, such as HyperCube or Cubeish! design.
The tool slides onto the 20x20 extrusion and the top hole is used to adjust the cutting iron (to thread the ends), or one of the three M5 holes on the side to adjust for drilling when the 20x20 is joined with a bolt/fastener.
All current 20x20 extruders have a 4.2mm diameter hole along their length (in the middle), if the hole is not 4.2mm, first drill the ends you are working on with a 4.2mm drill before threading with a M5 thread cutter.
The product was designed by
Michaelo