ESP32 Marauder enclosure

This is an enclosure for use with the ESP32 Marauder. The product contains:

• ESP32 Marauder
• 4 M2.5x10 Hex screws
• The front plate of the enclosure
• The body of the enclosure

How to mount the product:

1. Print both the front panel and the body
2. Attach the faceplate to the Marauder's display by placing the pins through the holes on the display's PCB
3. Lower the Marauder into the body of the enclosure, making sure the battery sits in the trench in the center of the body
4. Secure the front plate to the body with 4 M2.5x10 hex screws. The screws must be flush with the surface of the faceplate.